Mechanical & Aerospace Engineering Home Introduction DMAE Mission Chair Department Salient Features of Department Teaching Faculty Laboratory & Equipment Program Educational Objectives(PEOs) Program Learning Outcomes(PLOs) Courses Description Commulative PLO Attainment Reports Fall 2022 Courses Learning Outcomes(CLOs) Programs Offered Research Groups Research Projects Dr. Jehanzeb Masud Dr. Ali Sarosh Dr. Sohail Iqbal Research Staff

Dr. Hassan Ejaz (On leave abroad for Post-Doc)
Lecturer
Contact Information
  [email protected]
  529

Education Detail
PhD (Mechanical Engineering ) School of Mechanical and Manufacturing Engineering (SMME), NUST, Islamabad
MS (Mechanical Engineering) School of Mechanical and Manufacturing Engineering (SMME), NUST, Islamabad
BE (Mechanical Engineering) Air University Islamabad

1. Hassan Ejaz, A. Mubashar, I. Ashcroft, E. Uddin, and M. Khan, "Topology optimisation of adhesive joints using non-parametric methods," International Journal of Adhesion and Adhesives, vol. 81, pp. 1-10, Elsevier, 2018. (Q1, IF: 3.4)2. Hassan Ejaz, A. Mubashar, Emad Uddin, Zaib Ali, Nabeel Arif, “Influence of MWCNTs on Strength Properties of High Viscous Epoxy Adhesive and Fracture Behavior of Adhesively Bonded Joints,” Theoretical and Applied Fracture Mechanics, vol.120, 103412, Elsevier, 2022. (Q1, IF: 5.3)3. Hassan Ejaz, A. Mubashar, Emad Uddin, Zaib Ali, Nabeel Arif, “Effect of functionalised and non-functionalised GNPs addition on strength properties of high viscous epoxy adhesive and lap shear joints,” Polymer Testing, vol.113, 107680, Elsevier, 2022. (Q1, IF: 5.1)4. Hassan Ejaz, H.Y.Khan, F.A. Mazhar, Ibtisam ul Haq, “An Experimental and Simulation Study of Various Geometric Modifications Effects in Single Lap Joint,” Forces in Mechanics, vol. 09, 100144 ,Elsevier, 2022. (Q2, IF: 3.4)5. Hassan Ejaz, A. Mubashar, Emad Uddin, Zaib Ali, “A Comparative Study of GNPs and MWCNTs Additives on Dispersion Behavior and Strength Characteristics of the Adhesively Bonded Joints,” Journal of Dispersion Science and Technology, vol. 45, issue. 02, pp. 272-283, Taylor and Francis, 2022. (Q3, IF: 2.2)6. Iqra Fatima, Hassan Ejaz, Mehr Nigar, Rizwan Hussain, Aqeel A. Khurram, “Correlation between toughness and metal volume fraction in carbon-glass fiber laminates tested under tensile loading,” Composite Interfaces, vol. 30, issue. 10, pp. 1085-1098, Taylor and Francis, 2023. (Q2, IF: 2.6)7. Hassan Ejaz, Yousaira Muqbool, Zar Afshan, A. Mubashar, “Effect of Cork Powder Concentration and Service Temperature on Strength Characteristics and Failure Modes of Adhesively Bonded Lap Joints,” Theoretical and Applied Fracture Mechanics, vol. 126, 103955, Elsevier, 2023. (Q1, IF: 5.3)8. Hassan Ejaz, A. Mubashar, Emad Ud Din, Nabeel Arif, Saad Waqar “An experimental and simulation study of RGO effects on mechanical behaviour of structural adhesive and lap shear joints strength,” International Journal of Adhesion and Adhesives, vol. 126, 103480, Elsevier, 2023. (Q1, IF: 3.4)9. Hassan Ejaz, A. Mubashar, Ahsan Tanveer, Emad Uddin, Zaib Ali, Nabeel Arif, “The mechanical behavior of modified epoxy adhesive using GNPs, MWCNTs, and RGO nanomaterials,” Journal of Adhesion Science and Technology, vol. 38, issue. 10, pp. 1-21, Taylor and Francis, 2023. (Q2, IF: 2.6)10. Hafiz Muhammad Muzzammil, Yong-De Zhang, Hassan Ejaz, Qihang Yuan, Muhammad Muddassir, “A Review on Tissue-Needle Interaction and Path Planning Models for Bevel Tip Type Flexible Needle Minimal Intervention,” Mathematical Biosciences and Engineering, vol. 21, issue. 01, pp. 523-561, Aims Press, 2024. (Q1, IF: 2.6) 11. Umar Bin Ashraf, Aamir Mubashar, Manzar Masud, Hassan Ejaz, Syed Hameed Hussain, “Effect of Fibre Hybridization and Stacking Sequence on the Low Velocity Impact Response of Flax/Basalt/Aluminum Composite-Metal Joints,” Composite Structures, vol. 331,117925, Elsevier, 2024. (Q1; IF: 6.3)12. Shamsheer Haider, Hassan Ejaz, A Mubashar, Manzar Masud, “Effect of cork powder concentration and service temperature on strength characteristics and failure modes of tubular adhesively bonded joints,” Theoretical and Applied Fracture Mechanics, vol. 131, 104377, Elsevier, 2024. (Q1, IF: 5.3)b) Conference Publications1. Hassan Ejaz, Hanan Yusuf Khan, Faizan Ali Mazhar, Ibtisam Ul Haq, " Effect of Various Geometric Modifications on Adhesive Stress Profiles in Single Lap Joint,” vol. 19, pp. 133-138 IBCAST-IEEE, 2022.2. Hassan Ejaz, A.Mubashar, Muhammad A. M., Saad Waqar, "Effect of GNP and MWCNT Addition on Lap Shear Strength of Adhesively Bonded Joints,” vol. 19, pp. 116-121, IBCAST-IEEE, 2022.3. Hassan Ejaz, Dua Saboor, Saad Biin Sohail, Abdullah Hassan Mansoor, " Effect of Various Surface Treatments on Lap Shear Strength of Aluminum Adhesive Joints,” vol. 19, pp. 76-81, IBCAST-IEEE, 2022.4. M. Zain Khalid, Ahsan Tanveer, Sajjad Ahmad, Hassan Ejaz, and Hashier M. Farrukh, "Optimizing Traffic Flow: Utilizing IR and Load Cell Sensors for Cost- Effective Traffic Congestion Alleviation at Smart City Intersections," Engineering Proceedings, vol. 56, no. 1, p. 43, October 26, 2023. (Q4)

Research Interest
Adhesive Bonding
Adhesive Joints
Nanomodified Adhesives
Fiber Reinforced Composites
Metal Surface Treatment for Adhesive Bonding
Fiber Metal Laminates